Servo-valve module II Power Supply Panel

 

Components

The components used in this module are:

• 1 power supply 24V/7.2A (Power-One part #HE24-7.2-A)
• 1 over voltage protection (Power-One part #OVP-24)
• 1 3U 19" black panel (Hammond part #PBPA19005BK2)
• 1 AC receptacle (Qualtek part 703W-00/02)
• 1 AC line cord (Qualtek part #312010-01)
• 1 fuse holder (3AG) (Littlefuse part #342012)
• 1 rocker switch (E-Switch part #RR3130B)
• 1 LED green indicator light (Chicago Miniature part #1091M5-24V)
• 3-pin Amphenol female receptacle connectors (Amphenol part #16S-5S)
• 1 fuse

Functional description

The SVMII power supply panel provides the 24 volt DC supply needed to drive the servo-valves for the standing actuator setup. The supply is output to the two Amphenol connectors which are then connected to the SVMII modules.

The panel layout is available in CorelDraw10 file: pwrsupplylayout.cdr

The faceplate labels are available in CorelDraw10 file: pwrsupplylabel.cdr

---

Last modified: 2003-07-24 Shauna Forster