All electrodes and systems are tested and calibrated before shipment to ensure that manufacturing specifications have been met. Performance according to specifications is guaranteed for environments devoid of noise sources. Examples of common noise sources include electric motors (such as those found on treadmills and fans) and high current power supplies. Performance according to specifications cannot be guaranteed if DelSys devices are used in conjunction with other equipment that has not been reviewed and approved by DelSys Inc. Examples include proprietary A/D cards and electric exercise equipment. DelSys reserves the right to change specifications without notice.
Main Amplifier Unit |
|
Electrical |
|
Amplification/ Channel (overall) |
100, 1000, 10000 V/V (±1%) |
Frequency Response |
20±5 Hz - 2000 ±50 Hz, |
System Noise (R.T.I) |
< 1.2 µV over specified BW |
Maximum Output Voltage |
±5 Volts |
Isolation |
3750 Vrms, 1 minute |
Power Supply Leakage |
< 100 µA |
System Leakage Current |
< 10 µA |
Power Requirements |
12 VDC, 60 mA (quiescent) |
Signal Quality Check |
50/60 Hz interference |
Mechanical |
|
Number of Channels |
4 |
Output Connectors |
4 BNC, DSub-37F |
Operating Temperature |
15°C to 40°C ( 59°F to 104°F) |
Case Dimension |
20 x 11 x 4 cm ( 7.9 x 4.3 x 1.6") |
Weight |
0.50 Kg ( 1.1 lbs) |
Signal Quality Warning |
Red LED, selectable audible buzzer |
|
I/O Unit |
Number of Electrode Inputs |
4 |
Electrode Input Connectors |
Hypertronics Corporation |
Output connector |
RJ-45 Modular Jack |
Length of Tether |
25 FT |
Case Dimensions |
6.0 x 6.0 x 2.5 cm (2.4 x 2.4 x 1.0") |
Weight |
71 g (2.5 Oz) |
Revised December, 2000. |