Reaction Torque Sensor 2110-14

Specifications

	STANDARD	HIGH OUTPUT OPTION
Output at rated capacity: millivolts per volt, nominal	2	5
Nonlinearity: of rated output	ą0.1%	ą0.15%
Hysteresis: of rated output	ą0.1%	ą0.15%
Repeatability: of rated output	ą0.05%	ą0.07%
Zero balance: of rated output	ą1.0%	ą1.0%
Bridge resistance: ohms nominal	350	350
Temperature range, compensated: °F	+70 to +170	+70 to +170
Temperature range, compensated: °C	+21 to +77	+21 to +77
Temperature range, useable: °F	-65 to +200	-65 to +200
Temperature range, useable: °C	-54 to +93	-18 to +93
Temperature effect on output: of reading per °F	ą0.002%	ą0.003%
Temperature effect on output: of reading per °C	ą0.0036%	ą0.0054%
Temperature effect on zero: of rated output per °F	ą0.002%	ą0.003%
Temperature effect on zero: of rated output per °C	ą0.0054%	ą0.0054%
Excitation voltage, maximum: volts DC or AC rms	20	20
Insulation resistance, bridge/case: megohms at 50 VDC	>5000	>5000
Number of bridges	1	1

Design Drawings

2110.gif (11497 bytes)

Design Information

LOAD CARRYING CAPACITY
W = weight of test device
W x S = overhung moment
S = distance to center of gravity of test unit
Do not exceed moment (W x S) or shear (W), whichever value is attained first.
P = thrust.

Model		C	D	F	G*	H	N	J†
2110-2K	In.	3	4	3 1/4	1.500	0.125	1/2	21/64
2110-2K	cm	7.62	10.16	8.26	3.81	0.32	1.27	0.83
2110-5K	In.	3	4	3 1/4	1.500	0.125	1/2	21/64
2110-5K	cm	7.62	10.16	8.26	3.81	0.32	1.27	0.83
2110-5K	In.	3 1/2	5	4 1/4	2.000	0.25	3/4	25/64
2110-5K	cm	8.89	12.7	10.8	5.08	0.64	1.91	0.99
2111-20K	In.	3 1/2	5	4 1/4	2.000	0.25	3/4 Sq	25/64
2111-20K	cm	8.89	12.7	10.80	5.08	0.64	1.91	0.99
2112-50K	In.	7 3/8	8	6 1/2	3.500	0.31	1 1/2	41/64
2112-50K	cm	18.73	20.32	16.51	8.89	0.79	3.81	1.63
2112-100K	In.	7 3/8	8	6 1/2	3.500	0.31	1 1/2	41/64
2112-100K	cm	18.73	20.32	16.51	8.89	0.79	3.81	1.63
2113-200K	In.	8 1/2	9 3/4	8	4	0.31	1 1/2	49/64
2113-200K	cm	21.59	24.77	20.32	10.16	0.79	3.81	1.94
2114-300K	In.	10 1/2	14	11	6	0.31	2	1 1/64
2114-300K	cm	26.67	35.56	27.94	15.24	0.79	5.08	2.59
2114-500K‡	In.	10 1/2	14	11	6	0.31	2	1 1/64
2114-500K‡	cm	26.67	35.56	27.94	15.24	0.79	5.08	2.59
*Diameter tolerance +.002 — .000. †8 equally spaced holes are located within .005 of true position. ‡Calibration performed to 300,000 lbs. in. maximum.

Model No.	Capacity	Overload	Torsional	Max. Overhung	Max. Shear	Max. Thrust
			Stiffness	Moment WxS	W	P
	Lbs. In.	Lbs. In.	Lbs. In./Rad.	Lbs. In.	Lbs.	Lbs.
	N • m	N • m	N • m/Rad.	N • m	N	N
2110-2K	2,000	3,000	384,000	1,000	1,500	2,000
2110-2K	225	340	43,384	113	682	8,895
2110-5K	5,000	7,500	920,000	2,000	2,000	3,000
2110-5K	565	845	103,941	226	909	13,344
2111-10K	10,000	15,000	2,680,000	5,000	4,000	6,000
2111-10K	1,130	1,690	302,784	565	1,818	26,688
2111-20K	20,000	30,000	5,750,000	10,000	6,500	10,000
2111-20K	2,250	3,380	649,630	1,130	2,954	44,480
2112-50K	50,000	75,000	8,000,000	24,000	12,000	18,000
2112-50K	5,650	8,475	903,833	2,704	5,454	80,064
2112-100K	100,000	150,000	20,000,000	50,000	20,000	30,000
2112-100K	11,300	16,950	2,259,584	5,650	9,091	133,440
2113-200K	200,000	300,000	33,400,000	90,000	30,000	40,000
2113-200K	22,600	33,900	3,773,505	10,170	13,636	177,920
2114-300K	300,000	450,000	60,000,000	150,000	42,000	60,000
2114-300K	33,900	50,850	6,778,752	16,950	19,091	266,880
2114-500K*	500,000	750,000	114,000,000	200,000	55,000	80,000
2114-500K*	56,500	84,750	12,879,628	22,600	25,000	355,840
*Calibration performed to 300,000 lbs. in. maximum.

Safety Considerations

Reaction Torque Sensors - General Purpose
Models 2110 to 2114
	Description
	Flanged reaction torque sensors
	Features
	• High torsional stiffness • Higher resistance to bending moments • Minimal friction error • Low end sensitivity due to absence of moving parts

Contact Information for Lebow Products Inc.