Distribution panel

This panel is a the entry point of the hydraulic fluid level and filter signals that come from the pump in the basement. These signals are used to indicate if there is a problem with the pump and control the flow of hydraulic oil to the servo-valve via the logic module. Note that the filter signal is not used in our setup currently. This panel is also the entry point of the panic button signal which comes from the panic button and is also used to command the actuator in the logic module. Furthermore, this panel is the exit point of the pump, pressure, and forward flow signals that come from each respective solid state relay module. These signals go directly to the basement pump and control the state of the pump and the hydraulic flow.

Last modified: April 30, 2001 Laura Galiana